MITSUBISHI ELECTRIC MR-J2S- CL - Manual (Page 160)

6 - 1
6. SERVO CONFIGURATION SOFTWARE
6. SERVO CONFIGURATION SOFTWARE
The Servo Configuration software (MR2JW3-SETUP151E Ver.E1 or more) uses the communication
function of the servo amplifier to perform parameter setting changes, graph display, test operation, etc. on
a personal computer.
6.1 Specifications
Item Description
Communication signal Conforms to RS-232C
Baud rate 57600, 38400, 19200, 9600
System Station selection
Monitor Display all High-speed monitor, trend graph
Alarm Display, history, amplifier data
Diagnostic
I/O display, function device display, no motor rotation, total power-on time, software number
display, motor data display, tuning data, absolute encoder data, axis name setting
Parameters Parameter list, tuning, change list, detailed information, device setting
Test Jog, positioning, operation w/o motor, forced output, program test
Advanced-function Machine analyzer, gain search, machine simulation
Program-data Program data, indirect-addressing
File operation Data read, save, print
Others Help display
6.2 System configuration
(1) Components
To use this software, the following components are required in addition to the servo amplifier and
servo motor:
Model (Note 1) Description
(Note 2)
Personal computer
IBM PC-AT compatible where the English version of Windows 95, Windows 98, Windows Me,
Windows NT Workstation 4.0 or Windows 2000 Professional operates
Processor: Pentium 133MHz or more (Windows 95, Windows 98, Windows NT Workstation 4.0,
Windows 2000 Professional)
Pentium 150MHz or more (Windows Me)
Memory: 16MB or more (Windows 95), 24MB or more (Windows 98)
32MB or more (Windows Me, Windows NT Workstation 4.0, Windows 2000 Professional)
Free hard disk space: 30MB or more
Serial port used
OS
Windows 95, Windows 98, Windows Me, Windows NT Workstation 4.0, Windows 2000 Professional
(English version)
Display
One whose resolution is 800 600 or more and that can provide a high color (16 bit) display.
Connectable with the above personal computer.
Keyboard Connectable with the above personal computer.
Mouse Connectable with the above personal computer. Note that a serial mouse is not used.
Printer Connectable with the above personal computer.
Communication cable
MR-CPCATCBL3M
When this cannot be used, refer to (3) Section 14.1.4 and fabricate.
Note 1: Windows and Windows NT are the registered trademarks of Microsoft Corporation in the United State and other countries.
2: On some personal computers, this software may not run properly.