MITSUBISHI ELECTRIC MR-J2S- CL - Manual (Page 165)

6 - 6
6. SERVO CONFIGURATION SOFTWARE
6.5 Simple Program
6.5.1 Program data
The following screen is designed to set the program of the MR-J2S-CL.
(1) How to open the setting screen
Click "Program-Data" on the menu bar and click "Program-Data" in the menu.
(2) Explanation of Program Data window
a)
f)
b)
e)
g)
d)
c)
(a) Reading the program (a))
Click the "Read All" button to read the program stored in the servo amplifier.
(b) Writing the program (b))
Click the "Write All" button to write the program, whose setting has been changed, to the servo
amplifier.
(c) Verifying the programs (c))
Click the "Verify" button to verify the program contents on the personal computer and the program
contents of the servo amplifier.
(d) Selecting the program No. (d))
Used to select the program No. to be edited.