SATO HT200e - Manual (Page 112)

SECTION 6: ON LINE
SATO HT200e Page 6-7
(1) Setting for data regulating print position
This can specify area for regulating print position, name of format, and name of label.
Important: Parenthesis shows the number of byte for each item.
(2) Setting for fixed data
For fixed data, similar data in the entry screen for fixed data on HT200e shall be set.
Asterisk mark, a symbol for entry that can be displayed on the screen for HT200e will be 10H.
1) Normal field (normal): Set the number of characters and 10H (Entry symbol). Note that if
32 bytes can not be filled in this field, set 20H (Space).
2) Normal field (table data): Set “5BH 10H 10H 10H 5DH” and for the remaining 27 bytes,
set 20H (Space).
3) Barcode field: Set the number of characters and 10H (Entry symbol). If 32 bytes can not
be filled in this field, set 20H (Space). For C/D creation, set 43H (C) on its position. For
CODE128, set start code or A SET(>G), B SET(>H), and C Set(>I)in the beginning of
data. Note that code is not switchable in the process of data. In this code, human read-
able information can not be printed. A SET in this code, print for online can only is made.
4) Price field: In the beginning, set 24H ($) and then 10H for the No. of characters. If 32
bytes can not be filled in this field, set 20H (Space).
5) Calendar field (Addition of date): Set “5BH 10H 10H 10H 5DH” and for the remaining 27
bytes, set 20H (Space).
6) Calendar field (Addition of time): Set “5BH 10H 10H 10H 5DH” and for the remaining 28
bytes, set 20H (Space).
Important: On the screens of the normal field (table data) and calendar field, “5BH” is
expressed in “[”, and “5DH” in “]”.
Dummy (6) Vertical (3) Horizontal (3) Name of format (10) Name of label (10)