SATO HT200e User Manual
Page 43
SECTION 2: INSTALLATION AND SETUP
SATO HT200e
Page 2-25
PROCESS FOR TRANSFER OF FONT ON THE SCREEN (CURRENCY MARK
FONT)
6 + Power “ON”
[
← ]
[
→ ]
[
← ]
[
→ ]
[
← ]
[
→ ]
O
r:
Or:
Font for currency mark that is transferred from a host computer will be registered in a printer. The font registered
in the printer can be transferred to the host.
Note: When font for currency mark is transferred, on-line cable must be connected to the host before turning the
power “ON”.
Ｐ Ａ Ｒ Ａ Ｍ Ｅ Ｔ Ｅ Ｒ
Ｃ Ｏ Ｐ Ｙ
Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ
← →
Ｃ Ａ Ｒ Ｄ
Ｄ Ａ Ｔ Ａ
Ｓ Ｔ Ｏ Ｒ Ｅ ／ Ｒ Ｃ Ａ Ｌ Ｌ
2
Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ
← →
Ｈ Ｏ Ｓ Ｔ
Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ
Ｓ Ｔ Ｒ ／ Ｒ Ｃ Ａ Ｌ Ｌ
3
Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ
← →
Ｈ Ｏ Ｓ Ｔ
Ｆ Ｏ Ｎ Ｔ
Ｓ Ｔ Ｏ Ｒ Ｅ ／ Ｒ Ｃ Ａ Ｌ Ｌ
4
Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ
← →
Ｈ Ｏ Ｓ Ｔ
Ｆ Ｏ Ｎ Ｔ
Ｓ Ｅ Ｎ Ｄ ／ Ｒ Ｅ Ｃ
5
Ｈ Ｔ → Ｈ Ｏ Ｓ Ｔ
Ｈ Ｏ Ｓ Ｔ → Ｈ Ｔ
Ｈ Ｔ → Ｈ Ｏ Ｓ Ｔ
Ｓ Ｅ Ｎ Ｄ
Ｏ Ｋ ？
Ｙ
／ Ｎ
Ｈ Ｏ Ｓ Ｔ → Ｈ Ｔ
Ｒ Ｅ Ｃ
Ｏ Ｋ ？
Ｙ
／ Ｎ
Ｓ Ｅ Ｎ Ｄ Ｉ Ｎ Ｇ
Ｉ Ｔ Ｅ Ｍ : ０ ０ ０ １
Ｒ Ｅ Ｃ Ｅ Ｉ Ｖ Ｉ Ｎ Ｇ
Ｉ Ｔ Ｅ Ｍ : ０ ０ ０ １
Press [ENTR], so that it goes to the screen for the
selection of transferring print parameter.
Press [
← ], so that it returns to the process No. 1.
Press[
→ ], so that it goes to the process No. 3.
Press [ENTR], so that it goes to the screen for the
selection of copying print parameter.
Press [
→ ], so that it goes to the process No. 2.
Press [ENTR], so that it goes to the screen for the
selection of transfering preset.
Press [
← ], so that it returns to the process No. 2.
Press[
→ ], so that it goes to the process No. 4
Press [ENTR], so that it goes to the screen for the
selection of transfering font.
Press[
← ], so that it returns to the process No. 3.
For the transfering direction, select [
← ] and [ → ],
and press [ENTR] to go to the screen for the
confirmation of the transfer.
Press [ENTR], so that it goes to the screen for the
selection of transfering preset.
Press [
← ], so that it returns to the process No. 2.
Press [ENTR]:
“Y” is to start transferng.
“N” is to return to the process No. 4.
When sending one item is complete, the number of
items will be added.
After sending, it returns to the process No. 4.
When receiving one item is complete, the number of
items will be added.
After receiving, it returns to the process No. 4.