SATO HT200e - Manual (Page 90)

SECTION 4 ： FREE MODE
SATO HT200e Page 4-27
DISPLAY ON THE SCREEN FOR BARCODE FIELD
Field No. Position of digit
It will go to the entry for character pitch.
Note: Use [FMT] to return to the entry of the format number to be registered.
Press [ENTR] to determine the data selected, so that the entry for fixed data can be reached.
０ １ ０ １ : Ｆ Ｌ Ｄ Ｔ Ｙ Ｐ Ｅ
1 ７ : Ｂ Ａ Ｒ Ｃ Ｏ Ｄ Ｅ
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ０ ２ : Ｄ Ａ Ｔ Ａ Ｔ Ｙ Ｐ Ｅ
2 ０ : Ｈ Ｕ Ｍ Ａ Ｎ Ｆ Ｏ Ｎ Ｔ Ｏ Ｆ Ｆ ▽
７ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ０ ３ : Ｓ Ｙ Ｍ Ｂ Ｏ Ｌ Ｏ Ｇ Ｙ
3 ０ : Ｎ Ｗ ７ １ : Ｃ Ｏ Ｄ Ｅ ３ ９ ▽
７ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ０ ４ : Ｖ － Ｐ Ｏ Ｓ Ｉ Ｔ Ｉ Ｏ Ｎ
4
７ ０ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ０ ７ : Ｈ － Ｐ Ｏ Ｓ Ｉ Ｔ Ｉ Ｏ Ｎ
5
７ ０ １ ０ ２ ５ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ０ : Ｒ Ｏ Ｔ Ａ Ｔ Ｉ Ｏ Ｎ
6 ０ : ０ ° ２ : １ ８ ０ °
７ ０ １ ０ ２ ５ ０ ３ ２ ０ ０ ０ ０ ０ ０ ０
Enter “7” for the field type.
Value in one digit can be entered for the bar code type:
Select the value from “0” to “7”.
Value in 3 digits can be entered for the vertical position:
Select the values from “001” to “784”.
Note: “000” is a field where only entry is required, so
that no print is made.
Value in 3 digits can be entered for the horizontal
position: Select the values from “001”to “384”.
Value in one digit can be entered for the data type:
Select “0” or “1”.
Value in one digit can be entered for the rotation:
Select “0” or “2”.