SATO HT200e - Manual (Page 87)

SECTION 4 ： FREE MODE
Page 4-24 SATO HT200e
It will go to the entry for copy.
０ １ １ １ : Ｃ Ｈ Ａ Ｒ Ｐ Ｉ Ｔ Ｃ Ｈ
7
２ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ０ ０ ０ ０
０ １ １ ２ : Ｃ Ｈ Ａ Ｒ Ｃ Ｏ Ｕ Ｎ Ｔ
8
２ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ０ ０ ０ ０
０ １ １ ４ : Ｖ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
9
２ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ ０ ０ ０
０ １ １ ５ : Ｈ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
10
２ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ ０ ０
０ １ １ ６ : Ｉ Ｎ Ｐ Ｕ Ｔ Ｃ Ｈ Ｅ Ｃ Ｋ
11 ５ : Ｎ Ｕ Ｍ Ｏ Ｎ Ｌ Ｙ ▽
２ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ １ ０
０ １ １ ７ : Ｉ Ｎ Ｐ Ｍ Ｅ Ｔ Ｈ Ｏ Ｄ
12 ０ : Ｌ Ｅ Ｆ Ｔ １ : Ｒ Ｉ Ｇ Ｈ Ｔ
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ８ : Ｉ Ｎ Ｓ Ｅ Ｒ Ｔ Ｉ Ｏ Ｎ
13 ０ : Ｎ Ｏ Ｎ １ : CM ２ : CM ＆ ． ▽
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ９ : ０ Ａ Ｕ Ｔ Ｏ － Ｉ Ｎ Ｓ
14
０ ２ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ ０ : Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ ＆ Ｃ Ｍ
15 ０ : Ｏ Ｆ Ｆ ＋ Ｃ Ｍ ▽
０ ２ １
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ １ : ０ Ｒ Ｅ Ｓ Ｅ Ｒ Ｖ Ｅ Ｄ
16
０ ２ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
Value in one digit can be entered for spacing between
characters: Select the value from “0” to “9”.
Value in 2 digits can be entered for the number of
characters: Select the values from “01” to “10”.
Value in one digit can be entered for the magnification
of vertical expansion: Select the value from “1” to “4”.
Value in one digit can be entered for the magnification
of horizontal expansion: Select the value from “1” to “4”.
Value in one digit can be entered for the input check:
Select the value from “5”, “6”, and “7”.
Value in one digit can be entered for the input method:
Select “0” or “1”.
Value in one digit can be entered for the presentation
method: Select the value from “0”, “1”, “2”, “5”, “6”, and
“7”.
Value in one digit can be entered for with or without
0 insertion: Select “0” or “1”.
Value in one digit can be entered for entering the preset
and switching Euro currency mark: Enter the value from
“0”, “1”, “8”, and “9”.
0: No entry, so that general currency mark is not shown.
1: Entry required, so that general currency mark is
shown.
8: No entry, so that Euro currency mark is not shown.
“0” is fixed. Press [ENTR].