SATO HT200e - Manual (Page 46)

SECTION 2: INSTALLATION AND SETUP
Page 2-28 SATO HT200e
PROCESS ON THE SCREEN FOR CARD CLEAR
6 + Power “ON”
[ ← ] [ → ]
[ ← ] [ → ]
[ ← ] [ → ]
[ ← ] [ → ]
[ ← ] [ → ]
[ ← ] [ → ]
Ｐ Ａ Ｒ Ａ Ｍ Ｅ Ｔ Ｅ Ｒ Ｃ Ｏ Ｐ Ｙ
1 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｃ Ａ Ｒ Ｄ
Ｄ Ａ Ｔ Ａ Ｓ Ｔ Ｏ Ｒ Ｅ ／ Ｒ Ｃ Ａ Ｌ Ｌ
2 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｈ Ｏ Ｓ Ｔ
Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ Ｓ Ｔ Ｒ ／ Ｒ Ｃ Ａ Ｌ Ｌ
3 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｈ Ｏ Ｓ Ｔ
Ｆ Ｏ Ｎ Ｔ Ｓ Ｔ Ｏ Ｒ Ｅ ／ Ｒ Ｃ Ａ Ｌ Ｌ
4 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｈ Ｏ Ｓ Ｔ
Ｔ Ａ Ｂ Ｌ Ｅ Ｓ Ｔ Ｒ ／ Ｒ Ｃ Ａ Ｌ Ｌ
5 Ｐ Ｒ Ｉ Ｎ Ｔ Ｅ Ｒ ← → Ｈ Ｏ Ｓ Ｔ
Ｃ Ｕ Ｒ Ｒ Ｅ Ｎ Ｃ Ｙ Ｓ Ｅ Ｌ Ｅ Ｃ Ｔ
6
Ｃ Ａ Ｒ Ｄ Ｃ Ｌ Ｅ Ａ Ｒ
7
Ｃ Ａ Ｒ Ｄ Ｔ Ｙ Ｐ Ｅ
Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ
Ｂ Ａ Ｃ Ｋ Ｕ Ｐ
Ｃ Ａ Ｒ Ｄ Ｃ Ｌ Ｅ Ａ Ｒ Ｏ Ｋ ？
Ｙ ／ Ｎ
Ｃ Ａ Ｒ Ｄ Ｃ Ｌ Ｅ Ａ Ｒ Ｉ Ｎ Ｇ
Press [ENTR], so that it goes to the screen for the
selection of transferring print parameter.
Press [
← ], so that it returns to the process No. 1.
Press [ → ], so that it goes to the process No. 3.
Press [ENTR], so that it goes to the screen for the
selection of copying print parameter.
Press [
→ ], so that it goes to the process No. 2.
Press [ENTR], so that it goes to the screen for the
selection of transfering preset.
Press [
← ], so that it returns to the process No. 2.
Press [ → ], so that it goes to the process No. 4.
Press [ENTR], so that it goes to the screen for the
selection of transfering font.
Press [
← ], so that it returns to the process No. 3.
Press [ → ], so that it goes to the process No. 5.
Press [ENTR], so that it goes to the screen for the
selection of transfering table data.
Press [
← ], so that it returns to the process No. 4.
Press [ → ], so that it goes to the process No. 6.
Press [ENTR], so that it goes to the screen for the
selection of currency mark.
Press [
← ], so that it returns to the process No. 5.
Press [ → ], so that it goes to the process No. 7.
Press [ENTR], so that it goes to the screen for the
selection of the card clear type.
Press [
← ], so that it returns to the process No. 6.
The execution for card clear can be selected with [ ←]
and [ → ]: Where “Y” is selceted and [ENTR] is
pressed, it will implement the card clear.
Where “N” is selected and [ENTR] is pressed, it
returns to the process No. 7.
Select the type of card clear with [ ↑ ] and[ ↓ ]. Press
[ENTR], so that it goes to the screen for the
confirmation of card clear.
When completing card clear, it will return to the
process No. 7.