SATO HT200e - Manual (Page 28)

SECTION 2: INSTALLATION AND SETUP
Page 2-10 SATO HT200e
LOADING THE LABELS
This printer will produce labels in two modes: "continuous or dispense"
• For continuous follow steps 1 to 7.
• For dispense follow steps 8 to 13.
1.
Press the cover open lever on the right side of the printer.
2.
Open the top cover by pulling it upward.
3.
Place paper on the reel holder.
Reel Holder Paper
4.
Set paper to the paper holder. The paper must be set with
the printed side facing upward.
Top cover
Paper holder