SATO HT200e - Manual (Page 80)

SECTION 4 ： FREE MODE
SATO HT200e Page 4-17
It will go to the entry for copy.
For entry of copy:
０ １ １ ４ : Ｖ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
9
１ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ ０ ０ ０
０ １ １ ５ : Ｈ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
10
１ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ ０ ０
０ １ １ ６ : Ｉ Ｎ Ｐ Ｕ Ｔ Ｃ Ｈ Ｅ Ｃ Ｋ
11 ０ : Ｎ Ｏ Ｃ Ｈ Ｅ Ｃ Ｋ ▽
１ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ １ ０
０ １ １ ７ : Ｓ Ｅ Ｔ Ｔ Ｉ Ｔ Ｌ Ｅ
12
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ８ : ０ Ｒ Ｅ Ｓ Ｅ Ｒ Ｖ Ｅ Ｄ
13
１ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ９ : ０ Ａ Ｕ Ｔ Ｏ － Ｉ Ｎ Ｓ
14
１ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ ０ : Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ
15 ０ : Ｏ Ｆ Ｆ １ : Ｏ Ｎ
１ ０ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ １ : Ｃ Ｏ Ｌ Ｏ Ｒ
16 ０ : Ｂ Ｌ Ａ Ｃ Ｋ ３ : Ｒ Ｅ Ｄ ▽
１ ０ １ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ ２ : Ｃ Ｏ Ｐ Ｙ
17 ０ : Ｎ Ｏ Ｎ Ｅ ▽
１ ０ １ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ ３ : Ｃ Ｏ Ｐ Ｙ １ － １
18
１ ０ １ １ ０ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
Value in one digit can be entered for the magnification
of vertical expansion: Select the value from “1” to “4”.
Value in one digit can be entered for the magnification
of horizontal expansion: Select the value from “1" to”4”.
Value in one digit can be entered for the input check:
Select the value from “0”, “2”, “5”, “6”, and “7”.
Title can be displayed:
(Note: It will be displayed in only one field per format.)
“0” is fixed.
Value in one digit can be entered for with or without
0 insertion: Select “0” or “1”.
Value in one digit can be entered for preset:
Select “0” or “1”.
Value in one digit can be entered for print color.
Select from “0”, “3”, and “4”.
Enter value in one digit for an absence of a copy
function, an issuance of copy, or a reception of copy.
Enter value in 2 digits for the first position to specify the
range of copying characters.