SATO HT200e - Manual (Page 85)

SECTION 4 ： FREE MODE
Page 4-22 SATO HT200e
It will go to the entry for copy.
０ １ １ １ : Ｃ Ｈ Ａ Ｒ Ｐ Ｉ Ｔ Ｃ Ｈ
7
１ ２ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ０ ０ ０ ０
０ １ １ ２ : Ｃ Ｈ Ａ Ｒ Ｃ Ｏ Ｕ Ｎ Ｔ
8
１ ２ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ０ ０ ０ ０
０ １ １ ４ : Ｖ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
9
１ ２ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ ０ ０ ０
０ １ １ ５ : Ｈ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
10
１ ２ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ ０ ０
０ １ １ ６ : Ｉ Ｎ Ｐ Ｕ Ｔ Ｃ Ｈ Ｅ Ｃ Ｋ
11 ６ : Ｆ Ｕ Ｌ Ｌ Ｎ Ｕ Ｍ Ｅ Ｌ Ｉ Ｃ
１ ０ ２ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ １ ０
０ １ １ ７ : Ｓ Ｅ Ｑ
12 ０ : Ｓ Ｅ Ｑ Ｕ Ｅ Ｎ Ｃ Ｅ Ｎ Ｏ Ｎ Ｅ ▽
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ８ : ０ Ｒ Ｅ Ｓ Ｅ Ｒ Ｖ Ｅ Ｄ
13
１ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ９ : ０ Ａ Ｕ Ｔ Ｏ － Ｉ Ｎ Ｓ
14
１ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ ０ : Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ
15 ０ : Ｏ Ｆ Ｆ １ : Ｏ Ｎ
１ ０ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ １ : ０ Ｒ Ｅ Ｓ Ｅ Ｒ Ｖ Ｅ Ｄ
16
１ ０ １ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
Value in one digit can be entered for spacing between
characters: Select the value from “0” to “9”.
Value in 2 digits can be entered for the number of
characters: Select the values from “01” to “32”.
Value in one digit can be entered for the magnification
of vertical expansion: Select the value from “1” to “4”.
Value in one digit can be entered for the magnification
of horizontal expansion: Select the value from “1” to “4”.
Value in one digit can be entered for the input check:
Select the value from “5”, “6”, “8” and “9”.
Value in one digit can be entered for the table of
sequential No.: Select the value from “1” to “9”.
“0” is fixed.
Value in one digit can be entered for with or without
0 insertion: Select “0” or “1”.
Value in one digit can be entered for preset:
Select “0” or “1”.
“0” is fixed.