SATO HT200e - Manual (Page 89)

SECTION 4 ： FREE MODE
Page 4-26 SATO HT200e
０ １ １ １ : Ｃ Ｈ Ａ Ｒ Ｐ Ｉ Ｔ Ｃ Ｈ
7
３ ０ １ ０ ２ ５ ０ ３ ２ ０ ２ ０ ０ ０ ０ ０
０ １ １ ２ : Ｃ Ｈ Ａ Ｒ Ｃ Ｏ Ｕ Ｎ Ｔ
8
３ ０ １ ０ ２ ５ ０ ３ ２ ０ ２ ０ ０ ０ ０ ０
０ １ １ ４ : Ｖ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
３ ０ １ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ ０ ０ ０
０ １ １ ５ : Ｈ － Ｅ Ｘ Ｐ Ａ Ｎ Ｓ Ｅ
10
３ ０ １ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ ０ ０
０ １ １ ６ : Ｉ Ｎ Ｐ Ｕ Ｔ Ｃ Ｈ Ｅ Ｃ Ｋ
11 ６ : Ｎ Ｕ Ｍ Ｂ Ｅ Ｒ Ｏ Ｎ Ｌ Ｙ ▽
３ ０ １ ０ ２ ５ ０ ３ ２ ０ ２ ０ ８ １ １ ０
０ １ １ ７ : Ｉ Ｎ Ｃ Ｒ Ｅ Ｍ Ｅ Ｎ Ｔ
12
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ８ : Ｄ Ｉ Ｓ Ｐ Ｍ Ｅ Ｔ Ｈ Ｄ
13 ０ : ｄ ｄ ｍ ｍ ｙ ｙ ▽
１ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ９ : Ｓ Ｅ Ｐ Ａ Ｒ Ａ Ｔ Ｏ Ｒ
14 ０ : Ｎ Ｏ Ｎ Ｅ １ : ／ ▽
１ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ ０ : Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ
15 ０ : Ｏ Ｆ Ｆ １ : Ｏ Ｎ
１ ０ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ １ : ０ Ｒ Ｅ Ｓ Ｅ Ｒ Ｖ Ｅ Ｄ
16
１ ０ １ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
Value in one digit can be entered for spacing between
characters: Select the value from “0” to “9”.
Value in 2 digits can be entered for the number of
characters: Select the values from “01” to “32”.
Value in one digit can be entered for the magnification
of vertical expansion: Select the value from “1” to “4”.
Value in one digit can be entered for the magnification
of horizontal expansion: Select the value from “1” to “4”.
Value in one digit can be entered for the input check:
Select “6” or “7”.
Value in one digit can be entered for the addition:
Select “0” or “1”.
Valid in one digit can be entered for the presentation
method: Follow the spec. for setting.
Value in one digit can be entered for the separator:
Select the value from “1” to “4”.
Value in one digit can be entered for preset:
Select “0” or “1”.
“0” is fixed.