SATO HT200e - Manual (Page 81)

SECTION 4 ： FREE MODE
Page 4-18 SATO HT200e
Note 1) The entry for copy is common to the fields of “Normal”, “Normal/Table Data”, “Normal/Sequential
Number”, “Price”, and “Bar Code” on the screen.
Note 2) Where “0” is entered on the 22nd digit, the subsequent item automatically displays “0”.
０ １ ２ ５ : Ｃ Ｏ Ｐ Ｙ １ － ２
19
１ ０ １ １ ０ １ ０ ２ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ２ ７ : Ｃ Ｏ Ｐ Ｙ １ － ３
20
１ ０ １ １ ０ １ ０ ２ ０ ４ ０ ０ ０ ０ ０ ０
０ １ ２ ９ : Ｃ Ｏ Ｐ Ｙ １ － ４
21
１ ０ １ １ ０ １ ０ ２ ０ ４ ０ ３ ０ ０ ０ ０
０ １ ３ １ : Ｃ Ｏ Ｐ Ｙ ２ － １
22
１ ０ １ １ ０ １ ０ ２ ０ ４ ０ ３ ０ ０ ０ ０
０ １ ３ ３ : Ｃ Ｏ Ｐ Ｙ ２ － ２
23
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ３ ５ : Ｃ Ｏ Ｐ Ｙ ２ － ３
24
１ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ３ ７ : Ｃ Ｏ Ｐ Ｙ ２ － ４
25
１ ０ １ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ３ ９ : Ｃ Ｏ Ｐ Ｙ ３ － １
26
１ ０ １ １ ０ １ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ４ １ : Ｃ Ｏ Ｐ Ｙ ３ － ２
27
１ ０ １ １ ０ １ ０ ２ ０ ０ ０ ０ ０ ０
０ １ ４ ３ : Ｃ Ｏ Ｐ Ｙ ３ － ３
28
１ ０ １ １ ０ １ ０ ２ ０ ４ ０ ０ ０ ０
０ １ ４ ５ : Ｃ Ｏ Ｐ Ｙ ３ － ４
29
１ ０ １ １ ０ １ ０ ２ ０ ４ ０ ３ ０ ０
Enter value in 2 digits for number (or digits) of
characters to be copied.
Enter value in 2 digits for field number for characters to
be sent.
Enter value in 2 digits for position that specified
characters to start copying.
Enter value in 2 digits for the first position to specify the
range of copying characters.
Enter value in 2 digits for number (or digits) of
characters to be copied.
Enter value in 2 digits for field number for characters to
be sent.
Enter value in 2 digits for position that specified
characters to start copying.
Enter value in 2 digits for the first position to specify the
range of copying characters.
Enter value in 2 digits for number (or digits) of
characters to be copied.
Enter value in 2 digits for field number for characters to
be sent.
Enter value in 2 digits for position that specified
characters to start copying.