SATO HT200e - Manual (Page 88)

SECTION 4 ： FREE MODE
SATO HT200e Page 4-25
DISPLAY ON THE SCREEN FOR CALENDAR FIELD
Field No. Position of digit
It will go to the entry for character pitch.
Note: Use [FMT] to return to the entry of the format number to be registered.
Press [ENTR] to determine the data selected, so that the entry for fixed data can be reached.
０ １ ０ １ : Ｆ Ｌ Ｄ Ｔ Ｙ Ｐ Ｅ
1 ３ : Ｃ Ａ Ｌ Ｅ Ｎ Ｄ Ａ Ｒ ▽
０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ０ ２ : Ｄ Ａ Ｔ Ａ Ｔ Ｙ Ｐ Ｅ
2 ０ : Ｄ Ａ Ｔ Ｅ １ : Ｔ Ｉ Ｍ Ｅ
３ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ０ ３ : Ｆ Ｏ Ｎ Ｔ Ｔ Ｙ Ｐ Ｅ
3 １ : Ｘ ２ ２ : Ｘ ３
３ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ０ ４ : Ｖ － Ｐ Ｏ Ｓ Ｉ Ｔ Ｉ Ｏ Ｎ
4
３ ０ １ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ ０ ７ : Ｈ － Ｐ Ｏ Ｓ Ｉ Ｔ Ｉ Ｏ Ｎ
5
３ ０ １ ０ ２ ５ ０ ０ ０ ０ ０ ０ ０ ０ ０ ０
０ １ １ ０ : Ｒ Ｏ Ｔ Ａ Ｔ Ｉ Ｏ Ｎ
6 ０ : ０ ° １ : ９ ０ ° ▽
３ ０ １ ０ ２ ５ ０ ３ ２ ０ ０ ０ ０ ０ ０ ０
Enter “3” for the field type.
Enter “0” or “1” for the data type.
Value in 3 digits can be entered for the vertical position:
Select the values from “001” to “784”.
Note: “000” is a field where only entry is required, so
that no print is made.
Value in one digit can be entered for the character type.
Select “1” or “2”.
Value in 3 digits can be entered for the horizontal
position: Select the values from “001” to “384”.
Value in one digit can be entered for the rotation:
Select the value from “0”, “1”, “2”, and “3”.