SATO HT200e - Manual (Page 94)

SECTION 5 ： PRESET, TABLE DATA
Page 5-2 SATO HT200e
PRESET
[RCL]
[ → ]
[ → ]
[ ← ],[ ← ], [ ↓ ]
[ → ]
[ → ]
Note 1:The largest number of preset registration, combined with the fixed and free formats, will
be: 300 in a printer; 1,000 in 1Mbyte memory card; 2,000 in 2Mbyte memory card.
Note 2:Any format must be registered when the registration and print is performed for preset. In
the event that the format is changed, preset must be changed corresponding to it.
Ｆ Ｏ Ｒ Ｍ Ａ Ｔ Ｎ ｏ
1 ［ ・ ・ ］
Ｈ Ｔ ２ ０ ０ ｅ
［ Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ ］
2 Ｐ Ｒ Ｉ Ｎ Ｔ Ｓ Ｔ Ｒ Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
Ｄ Ｅ Ｌ Ｄ Ｕ Ｍ Ｐ Ｍ Ａ Ｓ Ｔ Ｅ Ｒ
［ Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ ］
3 Ｐ Ｒ Ｉ Ｎ Ｔ Ｓ Ｔ Ｒ Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
Ｄ Ｅ Ｌ Ｄ Ｕ Ｍ Ｐ Ｍ Ａ Ｓ Ｔ Ｅ Ｒ
［ Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ ］
4 Ｐ Ｒ Ｉ Ｎ Ｔ Ｓ Ｔ Ｒ Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
Ｄ Ｅ Ｌ Ｄ Ｕ Ｍ Ｐ Ｍ Ａ Ｓ Ｔ Ｅ Ｒ
［ Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ ］
5 Ｐ Ｒ Ｉ Ｎ Ｔ Ｓ Ｔ Ｒ Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
Ｄ Ｅ Ｌ Ｄ Ｕ Ｍ Ｐ Ｍ Ａ Ｓ Ｔ Ｅ Ｒ
［ Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ ］
6 Ｐ Ｒ Ｉ Ｎ Ｔ Ｓ Ｔ Ｒ Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
Ｄ Ｅ Ｌ Ｄ Ｕ Ｍ Ｐ Ｍ Ａ Ｓ Ｔ Ｅ Ｒ
［ Ｐ Ｒ Ｅ Ｓ Ｅ Ｔ ］
7 Ｐ Ｒ Ｉ Ｎ Ｔ Ｓ Ｔ Ｒ Ｍ Ｏ Ｄ Ｉ Ｆ Ｙ
Ｄ Ｅ Ｌ Ｄ Ｕ Ｍ Ｐ Ｍ Ａ Ｓ Ｔ Ｅ Ｒ
Press [RCL], so that it goes from the modes of the
print to the preset.
The screen for the selection of preset printing will
be displayed: Press [
→ ], so that it goes to the pro-
cess No. 3. Press [ENTR], so that it goes to the
entry of preset number.
The screen for the selection of preset storing will
be displayed: Press [
→ ], so that it goes to the pro-
cess No.4. Press [ENTR], so that it goes to the
entry of preset number.
The screen for the selection of preset modification
will be displayed: Press [
← ], [ ← ], [ ↓ ], so that it
goes to the process No. 5. Press [ENTR], so that it
goes to the entry of preset number.
The screen for the selection of preset deletion will
be displayed: Press [
→ ], so that it goes to the
process No. 6. Press [ENTR], so that it goes to
the entry of preset number.
The screen for the selection of preset dump will
be displayed: Press [
→ ], so that it goes to the
process No.7. Press [ENTR], so that it goes to
the entry of preset number.
The screen for the selection of preset master will
be displayed: Press [
→ ], so that it goes to the
process No. 2. Press [ENTR], so that it goes to
the entry of preset number.