Symbol Technologies AP-5131 - Manual (Page 157)

Network Management 5-33
Either the New MU ACL Policy or Edit MU ACL Policy screens display.
3. Assign a name to the new or edited ACL policy that represents an inclusion or exclusion
policy specific to a particular type of MU traffic you may want to use with a single or group
of WLANs. More than one WLAN can use the same ACL policy.
4. Configure the parameters within the Mobile Unit Access Control List field to allow or
deny MU access to the AP-5131.
The MU adoption list identifies MUs by their MAC address. The MAC address is the MU's
unique Media Access Control number printed on the device (for example, 00:09:5B:45:9B:07)
by the manufacturer. A maximum of 200 MU MAC addresses can be added to the New/Edit
MU ACL Policy screen.
Access for the listed
Mobile Units Use the drop-down list to select Allow or Deny . This rule applies
to the MUs listed in the table. For example, if the adoption rule is
to Allow, access is granted for all MUs except those listed in the
table.
Add Click the Add button to create a new entry using only the Start
MAC column to specify a MAC address, or uses both the Start
MAC and End MAC columns to specify a range of MAC addresses.
Delete Click the Delete button to remove a selected list entry.