Symbol Technologies AP-5131 - Manual (Page 179)

Network Management 5-55
7. Use the Primary WLAN drop-down menu to select a WLAN from those WLANs sharing the
same BSSID. The selected WLAN is the primary WLAN for the specified BSSID.
8. Click Apply to save any changes to the Radio Settings and Advanced Settings screens.
Navigating away from the screen without clicking Apply results in changes to the screens
being lost.
9. Click Undo Changes (if necessary) to undo any changes made to the screen and its sub-
screens. Undo Changes reverts the settings to the last saved configuration.
10. Click Logout to securely exit the AP-5131 Symbol Access Point applet. A prompt displays
confirming the logout before the applet is closed.
5.3.3 Configuring Bandwidth Management Settings
The AP-5131 can be configured to grant individual WLAN’s network bandwidth priority levels. Use the
Bandwidth Management screen to control the network bandwidth allotted to WLANs. Symbol
recommends defining a weighed scheme as needed when WLAN traffic supporting a specific
network segment becomes critical.
1. Select Network Configuration -> Wireless -> Bandwidth Management from the
AP-5131 menu tree.
BSSID Assign a BSSID value of 1 through 4 to a WLAN in order to map the
WLAN to a specific BSSID.
BC/MC Cipher A read only field displaying the downgraded BC/MC (Broadcast/
Multicast) cipher for a WLAN based on the BSSID and VLAN ID to
which it has been mapped.
Status Displays the following color coded status:
Red - Error (Invalid Configuration)
Yellow - Warning (Broadcast Downgrade)
Green - Good (Configuration is OK)
Message Displays the verbal status of the WLAN and BSSID assignments. If
the Status column displays green, the Message will typically be
Configuration is OK . If yellow, a description of invalid
configuration displays.