Symbol Technologies AP-5131 - Manual (Page 50)

AP-5131 Access Point Product Reference Guide 2-10
Ensure the cable length from the Ethernet source (host) to the power injector and AP-5131
does not exceed 100 meters (333 ft.)
The power injector has no On/Off power switch. The power injector receives power and is
ready for AP-5131 device connection and operation as soon as AC power is applied.
2.6.1.3 Power Injector LED Indicators
The power injector demonstrates the following LED behavior under normal and/or problematic
operating conditions:
For more information and device specifications for the Symbol power injector, refer to the Power
Injector Quick Install Guide (Part No. 72-70762-01) available from the Symbol Web site or the AP-5131
Software and documentation CDROM.
LED AC (Main) Port
Green (Steady) Power injector is receiving power from AC
outlet.
Indicates a device is connected to the
power injector’s outgoing Data & Power
cable.
Green (Blinking) Output voltage source is out of range. The power injector is overloaded or has a
short circuit.