Symbol Technologies AP-5131 - Manual (Page 416)

AP-5131 Access Point Product Reference Guide 8-122
AP5131>admin(network.firewall)> set
Description:
Defines the AP-5131 firewall parameters.
Syntax:
Example:
admin(network.firewall)> set mode enable
admin(network.firewall)> set ftp enable
admin(network.firewall)> set ip enable
admin(network.firewall)> set seq enable
admin(network.firewall)> set src enable
admin(network.firewall)> set syn enable
admin(network.firewall)> set win enable
admin(network.firewall)> show
Firewall Status : enable
Override LAN to WAN Access : disable
Configurable Firewall Filters
ftp bounce attack filter : enable
syn flood attack filter : enable
unaligned ip timestamp filter : enable
source routing attack filter : enable
winnuke attack filter : enable
seq num prediction attack filter : enable
mime flood attack filter : enable
max mime header length : 8192
max mime headers : 16
set mode <mode> Enables or disables the firewall.
nat-timeout <interval> Defines the NAT timeout value.
syn <mode> Enables or disables SYN flood attack check.
src <mode> Enables or disables source routing check.
win <mode> Enables or disables Winnuke attack check.
ftp <mode> Enables or disables FTP bounce attack check.
ip <mode> Enables or disables IP unaligned timestamp check.
seq <mode> Enables or disables sequence number prediction check.
mime filter Enables or disables MIME flood attack check.
len <length> Sets the max header length in bytes as specified by <length>
(with value in range
256 - 34463 ).
hdr <count> Sets the max number of headers as specified in <count>
(with value in range
12 - 34463 ).