Symbol Technologies AP-5131 User Manual
Page 345
Command Line Interface Reference 8-51
For information on configuring VPN using the applet (GUI), see
Configuring VPN Tunnels on page 6-34
salife
<name>
<lifetime>
Defines the name of the tunnnel <name> the
Security Association Life Time <300-65535>
applies to in seconds.
ike
opmode
<name>
<opmode>
Sets the Operation Mode of IKE for <name> to
Main
or
Aggr
(essive).
myidtype
<name>
<idtype>
Sets the Local ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (
IP
,
FQDN
,
or
UFQDN
).
remidtype
<name>
<idtype>
Sets the Remote ID type for IKE authentication for
<name> (1 to 13 characters) to <idtype> (
IP
,
FQDN
,
or
UFQDN
).
myiddata
<name>
<idtype>
Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required
when the ID type is set to IP.
remiddata
<name>
<idtype>
Sets the Local ID data for IKE authentication for
<name> to <idtype>. This value is not required
when the ID type is set to IP.
authtype
<name>
<authtype>
Sets the IKE Authentication type for <name> to
<authtype> (
PSK
or
RSA
).
authalgo
<name>
<authalgo>
Sets the IKE Authentication Algorithm for <name>
to
MD5
or
SHA1
.
phrase
<name>
<phrase>
Sets the IKE Authentication passphrase for
<name> to <phrase>.
encalgo
<name>
<encalgo>
Sets the IKE Encryption Algorithm for <name> to
<encalgo> (one of
DES
,
3DES
,
AES128
,
AES192
,
or
AES256
).
lifetime
<name>
<lifetime>
Sets the IKE Key life time in seconds for <name> to
<lifetime>.
group
<name>
<group>
Sets the IKE Diffie-Hellman Group for <name> to
either
G768
or
G1024
.