Symbol Technologies AP-5131 - Manual (Page 406)

AP-5131 Access Point Product Reference Guide 8-112
AP5131>admin(network.wireless.rogue-ap)> set
Description:
Defines the AP-5131 ACL rogue AP method.
Syntax:
Example:
admin(network.wireless.rogue-ap)>
admin(network.wireless.rogue-ap)> set mu-scan enable
admin(network.wireless.rogue-ap)> set interval 10
admin(network.wireless.rogue-ap)> set on-channel disable
admin(network.wireless.rogue-ap)> set detector-scan disable
admin(network.wireless.rogue-ap)> set symbol-ap enable
admin(network.wireless.rogue-ap)> set applst-ageout 10
admin(network.wireless.rogue-ap)> set roglst-ageout 10
admin(network.wireless.rogue-ap)> show
MU Scan : enable
MU Scan Interval : 10 minutes
On Channel : disable
Detector Radio Scan : disable
Detector Radio Band : none
Auto Authorize Symbol APs : enable
Approved AP age out : 10 minutes
Rogue AP age out : 10 minutes
For information on configuring the Rogue AP options available to the AP-5131 using the applet (GUI), see
Configuring Rogue AP Detection on page 6-53 .
set mu-scan <mode> Enables or disables to permit MUs to scan for rogue APs.
interval <minutes> Define an interval for associated MUs to beacon in attempting to locate rogue APs.
Value not available unless mu-scan is enabled.
on-channel <mode> Enables or disables on-channel detection.
detector-scan <mode> Enables or disables AP detector scan (dual-radio model only).
symbol-ap <mode> Enables or disables the Authorize Any AP with a Symbol MAC address option.
applst-ageout <minutes> Sets the approved AP age out time.
roglst-ageout <minutes> Sets the rogue AP age out time.