Symbol Technologies AP-5131 - Manual (Page 76)

AP-5131 Access Point Product Reference Guide 3-14
4. Click the Ping button to begin transmitting packets to the specified MU address.
Refer to the Number of Responses value to assess the number of responses from the MU
versus the number of ping packets transmitted by the AP-5131. Use the ratio of packets sent
versus the number of packets received the link quality between the MU and the AP-5131.
Click the OK button to exit the Echo Test screen and return to the MU Stats Summary screen.
3.5.3 Where to Go from Here?
Once basic connectivity has been verified, the AP-5131 can be fully configured to meet the needs of
the network and the users it supports. Refer to the following:
• For detailed information on AP-5131 device access, SNMP settings, network time,
importing/exporting device configurations and device firmware updates, see
Chapter 4,
System Configuration on page 4-1 .
• For detailed information on configuring AP-5131 LAN interface (subnet) and WAN interface
see,
Chapter 5, Network Management on page 5-1 .
• For detailed information on configuring specific encryption and authentication security
schemes for individual AP-5131 WLANs, see
Chapter 6, Configuring Access Point Security
on page 6-1 .
• To view detailed statistics on the AP-5131 and its associated MUs, see Chapter 7,
Monitoring Statistics on page 7-1 .
Packet Length Specifies the length of each packet transmitted to the MU during
the test. The default length is 100 bytes.