Symbol Technologies AP-5131 - Manual (Page 84)

AP-5131 Access Point Product Reference Guide 4-8
6. Use the Radius Server if a Radius server has been selected as the authentication server,
enter the required network address information.
7. Update the Administrator Access field to change the administrative password used to
access the AP-5131 configuration settings.
8. Click Apply to save any changes to the AP-5131 Access screen. Navigating away from the
screen without clicking the Apply button results in all changes to the screen being lost.
9. Click Undo Changes (if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the AP-5131 Access screen to the last saved configuration.
10. Click Logout to securely exit the AP-5131 Symbol Access Point applet. A prompt displays
confirming the logout before the applet is closed.
Radius Designates that a Radius server is used in the authentication
credential verification. If using this option, the connected PC is
required to have its Radius credentials verified with an external
Radius server. Additionally, the Radius Server’s Active Directory
should have a valid user configured and have a PAP based Remote
Access Policy configured for Radius Admin Authentication to work.
Radius Server IP Specify the numerical (non DNS name) IP address of the Remote
Authentication Dial-In User Service (Radius) server. Radius is a
client/server protocol and software enabling remote-access
servers to communicate with a server used to authenticate users
and authorize access to the requested system or service.
Port Specify the port on which the server is listening. The Radius server
typically listens on ports 1812 (default port).
Shared Secret Define a shared secret for authentication on the server. The shared
secret is required to be the same as the shared secret defined on
the Radius server. Use shared secrets to verify Radius messages
(with the exception of the Access-Request message) sent by a
Radius-enabled device configured with the same shared secret.
Apply the qualifications of a well-chosen password to the
generation of a shared secret. Generate a random, case-sensitive
string using letters, numbers and symbols. The default is symbol.
Change Admin
Password Click the Change Admin Password button to display a screen
for updating the AP administrator password. Enter and confirm a
new administrator password as required.