Symbol Technologies AP-5131 - Manual (Page 551)

AP-5131 Usage Scenarios B-5
d. Under the General tab, check all 3 options mentioned within the Extended Options table
and enter a value for each option.
3. Copy both the firmware and configuration files to the appropriate directory on the TFTP
Server.
By default, auto update is enabled on the AP-5131 (since the LAN Port is a DHCP Client,
out-of-the-box auto update support is on the LAN Port).
4. Restart the AP-5131.
5. While the AP-5131 boots up, verify the AP-5131:
• Obtains and applies the expected IP Address from the DHCP Server
• Downloads the firmware and configuration files from the TFTP Server and updates both
as required. Verify the file versions within the AP-5131’s System Settings screen.
B.1.1.3 DHCP Priorities
The following flowchart indicates the priorities used by the AP-5131 when the DHCP server is
configured for multiple options.
NOTE If the firmware files are the same, the firmware will not get updated. If
the configuration file name matches the last saved configuration file on
the AP-5131, the configuration will not get updated.