Symbol Technologies AP-5131 - Manual (Page 167)

Network Management 5-43
8. Click OK to save any changes to the Hotspot Configuration screen. Navigating away from
the screen without clicking Apply results in all changes to the screens being lost.
9. Click Cancel (if necessary) to undo any changes made. Cancel reverts the settings displayed
on the Hotspot Configuration screen to the last saved configuration.
Defining the Hotspot White List
To host a Login, Welcome or Fail page on the external Web server, the IP address of that Web server
should be in AP-5131’s White List.
Select mode Use the Select mode drop-down menu to define whether an
Internal or External server is to be used for the primary server.
Pri Server IP Define the IP address of the primary Radius server. This is the
address of your first choice for Radius server.
Pri Port Enter the TCP/IP port number for the server acting as the primary
Radius server. The default port is 1812.
Pri Secret Enter the shared secret password used with the primary Radius
Server.
Sec Server IP Define the IP address of the secondary Radius server. This is the
address of your second choice for Radius server.
Sec Port Enter the TCP/IP port number for the server acting as the secondary
Radius server. The default port is 1812.
Sec Secret Enter the shared secret password used with the secondary Radius
Server.