Symbol Technologies AP-5131 - Manual (Page 68)

AP-5131 Access Point Product Reference Guide 3-6
Enter the current password and a new admin password in fields provided, and click Apply .
Once the admin password has been updated, a warning message displays stating the AP-
5131 must be set to a country.
The export function will always export the encrypted Admin User password. The import
function will import the Admin Password only if the AP-5131 is set to factory default. If the
AP-5131 is not configured to factory default settings, the Admin User password WILL NOT
get imported.
.
3.5.1 Configuring Device Settings
Configure a set of minimum required device settings within the AP-5131 Quick Setup screen. The
values defined within the Quick Setup screen are also configurable in numerous other locations
within the AP-5131 menu tree. When you change the settings in the Quick Setup screen, the values
also change within the screen where these parameters also exist. Additionally, if the values are
updated in these other screens, the values initially set within the Quick Setup screen will be updated.
To define a basic AP-5131 configuration:
1. Select System Configuration -> Quick Setup from the AP-5131 menu tree, if the Quick
Setup screen is not already displayed.
NOTE Though the AP-5131 can have its basic settings defined using a number of
different screens, Symbol recommends using the AP-5131
Quick Setup
screen to set the correct country of operation and define its minimum
required configuration from one convenient location.