Symbol Technologies AP-5131 - Manual (Page 478)

AP-5131 Access Point Product Reference Guide 8-184
AP5131>admin(system.fw-update)>set
Description:
Defines AP-5131 firmware update settings and user permissions.
Syntax:
For information on updating AP-5131 device firmware using the applet (GUI), see Updating Device Firmware on page 4-41 .
set fw-auto <mode> When enabled, updates device firmware each time the firmware versions are found to be
different between the AP-5131 and the specified firmware on the remote system.
cfg-auto <mode> When enabled, updates device configuration file each time the confif file versions are
found to be different between the AP-5131 and the specified LAN or WAN interface.
iface <wan/lan1/lan2> Defines the target interface for version updates if the fw-auto and/or cfg-auto options are
enabled.
file <name> Defines the firmware file name (1 to 39 characters).
path <path> Specifies a path for the file (1 to 39 characters)..
server <ip> The IP address for the FTP/TFTP server used for the firmware and/or config file update.
user <name> Specifies a username for FTP server login (1 to 39 characters)..
passwd <password> Specifies a password for FTP server login (1 to 39 characters).. Default is symbol.