3 viewing wireless statistics, Viewing wireless statistics -11, Viewing wireless statistics – Symbol Technologies AP-5131 User Manual

Page 271

Advertising
background image

Monitoring Statistics

7-11

4.

Click the

Logout

button to securely exit the AP-5131 Symbol Access Point applet. There will

be a prompt confirming logout before the applet is closed.

7.3 Viewing Wireless Statistics

Use the

WLAN Statistics Summary

screen to view overview statistics for active (enabled) WLANs

on the AP-5131. The

WLAN Summary

field displays basic information such as number of Mobile

Units (MUs) and total throughput for each of the active WLANs. The

Total RF Traffic

section displays

basic throughput information for all RF activity on the AP-5131. The WLAN Statistics Summary screen
is view-only with no user configurable data fields.

If a WLAN is not displayed within the

Wireless Statistics Summary

screen,

see

Enabling Wireless

LANs (WLANs) on page 5-22

to enable the WLAN.

For information on configuring the properties of

individual WLANs, see

Creating/Editing Individual WLANs on page 5-24

.

To view AP-5131 WLAN Statistics:

1.

Select

Status and Statistics

->

Wireless Stats

from the AP-5131 menu tree.

State

Displays whether a bridge is forwarding traffic to other members
of the mesh network (over this port) or blocking traffic. Each viable
member of the mesh network must forward traffic to extent the
coverage area of the mesh network.

Path Cost

The root path cost is the distance (cost) from the sending bridge to
the root bridge.

Designated Root

Displays the MAC address of the AP-5131 defined with the lowest
priority within the Mesh STP Configuration screen.

Designated Bridge

There is only one root bridge within each mesh network. All other
bridges are designated bridges that look to the root bridge for
several mesh network timeout values. For information on root and
bridge designations, see

Setting the LAN Configuration for Mesh

Networking Support on page 9-5

.

Designated Port

Each designated bridge must use a unique port. The value listed
represents the port used by each bridge listed within the table to
route traffic to other members of the mesh network.

Designated Cost

Displays the unique distance between each AP-5131 MAC address
listed in the Designated Bridge column and the AP-5131 MAC
address listed in the Designated Root column.

Advertising