Symbol Technologies AP-5131 - Manual (Page 299)

Command Line Interface Reference 8-5
AP5131>admin>passwd
Description:
Changes the password for the admin login.
Syntax:
Example:
admin> passwd
Old Admin Password:******
New Admin Password:******
Verify Admin Password:******
Password successfully updated
For information on configuring passwords using the applet (GUI), see Setting Passwords on page 6-3 .
passwd Changes the admin password for AP-5131 access. This requires typing the old admin password and entering a new
password and confirming it. Passwords can be up to 11 characters. The AP-5131 CLI treats the following as invalid
characters:
| " & , \ ' < >
In order to avoid problems when using the AP-5131 CLI, these characters should be avoided.