Symbol Technologies AP-5131 - Manual (Page 457)

Command Line Interface Reference 8-163
AP5131>admin(system.snmp.traps)> list
Description:
Lists SNMP trap entries.
Syntax:
Example:
admin(system.snmp.traps)> add v1v2 203.223.24.2 162 mycomm v1
admin(system.snmp.traps)> list v1v2c
----------------------------------------------------------------------
index dest ip dest port community version
----------------------------------------------------------------------
1 203.223.24.2 162 mycomm v1
admin(system.snmp.traps)> add v3 201.232.24.33 555 BigBoss none md5
admin(system.snmp.traps)> list v3 all
index : 1
destination ip : 201.232.24.33
destination port : 555
username : BigBoss
security level : none
auth algorithm : md5
auth password : ********
privacy algorithm : des
privacy password : ********
For information on configuring SNMP traps using the applet (GUI), see Configuring SNMP RF Trap Thresholds on page 4-30 .
l
list v1v2c Lists SNMP v1/v2c access entries.
v3 <idx> Lists SNMP v3 access entry <idx>.
all Lists all SNMP v3 access entries.