Symbol Technologies AP-5131 - Manual (Page 385)

Command Line Interface Reference 8-91
AP5131>admin(network.wireless.radio.802-11bg)> set
Description:
Defines specific 802.11b/g radio parameters.
Syntax:
Example:
admin(network.wireless.radio.802-11bg)> set placement indoor
admin(network.wireless.radio.802-11bg)> set ch-mode user
admin(network.wireless.radio.802-11bg)> set channel 1
admin(network.wireless.radio.802-11bg)> set antenna full
admin(network.wireless.radio.802-11bg)> set power 4
admin(network.wireless.radio.802-11bg)> set bg-mode enable
admin(network.wireless.radio.802-11bg)> set rates
admin(network.wireless.radio.802-11bg)> set beacon 100
admin(network.wireless.radio.802-11bg)> set dtim 1 40
admin(network.wireless.radio.802-11bg)> set preamble disable
admin(network.wireless.radio.802-11bg)> set rts 2341
admin(network.wireless.radio.802-11bg)> set qos cwmin 125
admin(network.wireless.radio.802-11bg)> set qos cwmax 255
admin(network.wireless.radio.802-11bg)> set qos aifsn 7
admin(network.wireless.radio.802-11bg)> set qos txops 0
admin(network.wireless.radio.802-11bg)> set qos param-set 11g-default
For information on configuring the Radio 1 Configuration options available to the AP-5131 using the applet (GUI), see
Configuring the 802.11a or 802.11b/g Radio on page 5-48 .
set placement Defines the AP-5131 radio placement as indoors or outdoors.
ch-mode Determines how the radio channel is selected.
channel Defines the actual channel used by the radio.
antenna Sets the radio antenna power
power Defines the radio antenna power transmit level.
bg-mode Enables or disables 802-11bg radio mode support.
rates Sets the supported radio transmit rates.
beacon Sets the beacon interval used by the radio.
dtim Defines the DTIM interval (by index) used by the radio.
preamble Enables or disables support for short preamble for the radio.
rts Defines the RTS Threshold value for the radio.
qos Defines the cwmin, cwmax, aifsn and txops levels for the QoS policy used for the radio.
qos param-set Defines the data type proliferating the mesh network. When set to a value other then
manual, editing the access category values is not necessary. Options include; 11g-default,
11b-default, 11g-wifi, 11b-wifi, 11g-voice, 11b-voice or manual (for advanced users).