Symbol Technologies AP-5131 - Manual (Page 184)

AP-5131 Access Point Product Reference Guide 5-60
2. Select a routing direction from the RIP Direction drop-down menu. Both (for both
directions), Rx only (receive only), and TX only (transmit only) are available options.
3. If RIP v2 or RIP v2 (v1 compat) is the selected RIP type, the RIP v2 Authentication field
becomes active. Select the type of authentication to use from the Authentication Type
drop-down menu. Available options include:
RIP v2 RIP version 2 enables the use of a simple authentication
mechanism to secure table updates. More importantly, RIP version
2 supports subnet masks, a critical feature not available in RIP
version 1. This selection is not compatible with RIP version 1
support.