Ap5131>admin(system.snmp.access)> delete – Symbol Technologies AP-5131 User Manual
Page 450
AP-5131 Access Point Product Reference Guide
8-156
AP5131>admin(system.snmp.access)> delete
Description:
Deletes SNMP access entries for specific v1v2 and v3 user definitions.
Syntax:
Example:
admin(system.snmp.access)>
list acl
-----------------------------------------------------------------------------
index start ip
end ip
-----------------------------------------------------------------------------
1
209.236.24.1
209.236.24.46
admin(system.snmp.access)>
delete acl all
admin(system.snmp.access)>
list acl
-----------------------------------------------------------------------------
index start ip
end ip
-----------------------------------------------------------------------------
For information on configuring SNMP access settings using the applet (GUI), see
Configuring SNMP Access Control on page 4-23
.
delete acl
<idx>
Deletes entry <idx> (1-10) from the access control list.
all
Deletes all entries from the access control list.
v1v2c
<idx>
Deletes entry <idx> (1-10) from the v1/v2 configuration list.
all
Deletes all entries from the v1/v2 configuration list.
v3
<idx>
Deletes entry <idx> (1-10) from the v3 user definition list.
all
Deletes all entries from the v3 user definition list.