Symbol Technologies AP-5131 User Manual
Page 232
AP-5131 Access Point Product Reference Guide
6-46
Local ID Type
Select the type of ID to be used for the
AP-5131
end of the SA.
•
IP - Select IP if the local ID type is the IP address specified
as part of the tunnel.
•
FQDN - Use FQDN if the local ID is a fully qualified domain
name (such as
sj.symbol.com
).
•
UFQDN - Select UFQDN if the local ID is a user fully-qualified
email (such as
).
Local ID Data
Specify the FQDN or UFQDN based on the Local ID type assigned.
Remote ID Type
Select the type of ID to be used for the
AP-5131
end of the tunnel
from the
Remote ID Type
drop-down menu.
•
IP - Select the IP option if the remote ID type is the IP address
specified as part of the tunnel.
•
FQDN - Select FQDN if the remote ID type is a fully qualified
domain name (such as sj.symbol.com). The setting for this
field does not have to be fully qualified, however it must
match the setting for the Certificate Authority.
•
UFQDN - Select this item if the remote ID type is a user
unqualified email address (such as [email protected]).
The setting for this field does not have to be unqualified, it
just must match the setting of the field of the Certificate
Authority.
Remote ID Data
If FQDN or UFQDN is selected, specify the data (either the qualified
domain name or the user name) in the
Remote ID Data
field.
IKE Authentication
Mode
Select the appropriate IKE authentication mode:
•
Pre-Shared Key (PSK) - Specify an authenticating algorithm
and passcode used during authentication.
•
RSA Certificates - Select this option to use RSA certificates
for authentication purposes. See the CA Certificates and Self
certificates screens to create and import certificates into the
system.