Symbol Technologies AP-5131 - Manual (Page 324)

AP-5131 Access Point Product Reference Guide 8-30
AP5131>admin(network.lan.dhcp)> set
Description:
Sets DHCP parameters for the LAN port.
Syntax:
Example:
admin(network.lan.dhcp)> set range 1 192.168.0.100 192.168.0.254
admin(network.lan.dhcp)> set lease 1 86400
admin(network.lan.dhcp)> show
**LAN1 DHCP Information**
DHCP Address Assignment Range:
Starting IP Address : 192.168.0.100
Ending IP Address : 192.168.0.254
Lease Time : 86400
For information on configuring DHCP using the applet (GUI), see Configuring the LAN Interface on page 5-1 .
set range <LAN-idx> <ip1> <ip2> Sets the DHCP assignment range from IP address <ip1> to IP address <ip2> for the
specified LAN.
lease <LAN-idx> <lease> Sets the DHCP lease time <lease> in seconds ( 1 - 999999 ) for the specified LAN.