Symbol Technologies AP-5131 - Manual (Page 228)

AP-5131 Access Point Product Reference Guide 6-42
AP2 Inbound SPI = 801
AP2 Outbound SPI = 800
4. Click Ok to return to the VPN screen. Click Apply to retain the settings made on the Manual
Key Settings screen.
5. Click Cancel to return to the VPN screen without retaining the changes made to the
Manual Key Settings screen.
6.11.2 Configuring Auto Key Settings
The AP-5131’s Network Management System can automatically set encryption and authentication
keys for VPN access. Use the
Auto Key Settings screen to specify the type of encryption and
authentication, without specifying the keys. To manually specify keys, cancel out of the Auto Key
Settings screen, select the Manual Key Exchange radio button, and set the keys within the
Manual Key Setting screen.
To configure auto key settings for the AP-5131:
1. Select Network Configuration -> WAN -> VPN from the AP-5131 menu tree.
2. Refer to the VPN Tunnel Config field, select the Auto (IKE) Key Exchange radio button
and click the Auto Key Settings button.