Symbol Technologies AP-5131 - Manual (Page 347)

Command Line Interface Reference 8-53
AP5131>admin(network.wan.vpn)> list
Description:
Lists VPN tunnel entries.
Syntax:
Example:
admin(network.wan.vpn)> list
--------------------------------------------------------------------------
Tunnel Name Type Remote IP/Mask Remote Gateway Local WAN IP
--------------------------------------------------------------------------
Eng2EngAnnex Manual 192.168.32.2/24 192.168.33.1 192.168.24.198
SJSharkey Manual 206.107.22.45/27 206.107.22.2 209.235.12.55
admin(network.wan.vpn)> list SJSharkey
--------------------------------------------------------------------------
Detail listing of VPN entry:
--------------------------------------------------------------------------
Name : SJSharkey
Local Subnet : 1
Tunnel Type : Manual
Remote IP : 206.107.22.45
Remote IP Mask : 255.255.255.224
Remote Security Gateway : 206.107.22.2
Local Security Gateway : 209.239.160.55
AH Algorithm : None
Encryption Type : ESP
Encryption Algorithm : DES
ESP Inbound SPI : 0x00000100
ESP Outbound SPI : 0x00000100
For information on displaying VPN information using the applet (GUI), see Viewing VPN Status on page 6-48 .
list <cr> Lists all tunnel entries.
<name> Lists detailed information about tunnel named <name>. Note that the <name> must match case with the name of
the VPN tunnel entry