Ap5131>admin(network.wireless.acl)> create – Symbol Technologies AP-5131 User Manual
Page 376
AP-5131 Access Point Product Reference Guide
8-82
AP5131>admin(network.wireless.acl)> create
Description:
Creates an MU ACL policy.
Syntax:
Example:
admin(network.wireless.acl.create)>
show
Policy Name
: Front Lobby
Policy Mode
: allow
-----------------------------------------------------------------------------
index
start mac
end mac
-----------------------------------------------------------------------------
1
00A0F8334455
00A0F8334455
2
00A0F8400000
00A0F8402001
admin(network.wireless.acl.create)>
set acl-name engineering
admin(network.wireless.acl.create)>
set mode deny
admin(network.wireless.acl.create)>
add-addr 00A0F843AABB
admin(network.wireless.acl.create)>
add-policy
For information on configuring the ACL options available to the AP-5131 using the applet (GUI), see
Control List (ACL) on page 5-31
.
create
show
<acl-name> Displays the parameters of a new ACL policy.
set
acl-name
<index>
Sets the MU ACL policy name.
mode
<acl-mode> Sets the ACL mode for the defined index (1-16). Allowed MUs can access
the AP-5131 managed LAN. Options are
deny
and
allow
.
add-addr
<mac1> or
<mac1> <mac2>
Adds specified MAC address to list of ACL MAC addresses.
delete
<index>
<all>
Removes either a specified ACL index or all ACL entries.
add-policy
Completes the policy creation and exits the CLI.
..
Cancels the creation of the ACL and exits the CLI.