Sun Microsystems Sun Fire X4100 User Manual
Page 125
Advertising
Chapter 3
Maintaining the Sun Fire X4100 Server
3-65
3. Remove the power supply:
a. Grasp the power supply handle and push the thumb latch toward the center of
the power supply. See
b. While continuing to push on the latch, use the handle to remove the power
supply from the chassis.
FIGURE 3-61
Removing a Power Supply
Installation is the reverse of this procedure.
Note –
When installing a new power supply, press it into the bay until the thumb
latch clicks, indicating that it is locked.
Advertising