Sun Microsystems Sun Fire X4100 User Manual
Page 200
Advertising
4-70
Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
FIGURE 4-66
Disconnecting the Flex Cable’s Four Connectors
10. Disconnect the rear fan tray cable from the connector on the power distribution
board. See
FIGURE 4-67
Disconnecting the Rear Fan Tray From the Power Distribution Board
11. Use a No. 2 Phillips screwdriver to remove the three screws that secure the power
distribution board to the chassis and bus bars. See
12. Raise the plastic air baffles that cover the power supply connectors up and toward
the rear of the chassis to provide clearance.
Advertising