Figure 3-32 – Sun Microsystems Sun Fire X4100 User Manual
Page 95
Advertising
Chapter 3
Maintaining the Sun Fire X4100 Server
3-35
FIGURE 3-32
Unfastening the Front I/O Board Screw From the Chassis
Note –
The white plastic sheath that is attached to the front I/O board is an
insulator, which protects the board components. Do not remove this insulator sheath
from the front I/O board.
12. Gently push the front I/O board toward the rear of the chassis approximately 0.25
inch (6 mm), freeing the board from the two locating tabs at its bottom-left and
bottom-right corners. See
.
FIGURE 3-33
Releasing the Front I/O Board From the Chassis Locating Tabs
Advertising