Sun Microsystems Sun Fire X4100 - Manual (Page 258)

E-10 Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
E.3.4 Adapter Properties Screen
The Adapter Properties screen allows you to view and modify adapter settings. It
also provides access to all other screens.
FIGURE E-3 shows an example of the Adapter
Properties screen. TABLE E-4 describes the fields of the screen.
********************************************************************************
* LSI Logic MPT Setup Utility v6.02.00.00 (2005.07.08) *
* Adapter Properties -- SAS1064 *
* *
* Adapter SAS1064 *
* PCI Slot 00 *
* PCI Address(Bus/Dev/Func) 02:03:00 *
* MPT Firmware Revision 1.04.00.00-IR *
* SAS Address 50003BA0:000003BA *
* Status Enabled *
* Boot Order 0 *
* Boot Support [Enabled BIOS & OS] *
* *
* RAID Properties *
* *
* SAS Topology *
* *
* Advanced Adapter Properties *
* *
* *
* *
* *
* Esc = Exit Menu F1/Shift+1 = Help *
* Enter = Select Item -/+ = Change Item *
*******************************************************************************
FIGURE E-3 Adapter Properties Screen
TABLE E-4 Adapter Properties Screen Field Descriptions
Field Description
Adapter The specific LSI Logic SAS controller type.
PCI Slot The PCI slot in which the controller is located.
PCI Address The PCI address assigned to the adapter by the system BIOS.
Bus value has range 0x00 - 0xFF, 0 - 255 decimal.
Device value has range 0x00 - 0x1F, 0 - 31 decimal.
Function has range 0x00 - 0x7, 0 - 7 decimal.
MPT Firmware
Revision The Fusion MPT firmware version and type (IR or IT).
SAS Address The SAS Address assigned to this adapter.