3 removing the front bezel, Removing the front bezel – Sun Microsystems Sun Fire X4100 User Manual
Page 64
Advertising
3-4
Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
3.2.3
Removing the Front Bezel
Remove the bezel from the front of the chassis by following these steps:
1. Open the fan bay door and use a No. 2 Phillips screwdriver to unfasten the
captive screw that locks the bezel in place. See
.
2. Pull the bezel away from the chassis.
Note –
Be careful to avoid bending the bezel by loosening it from the middle and
both end sockets simultaneously.
FIGURE 3-3
Unfastening the Front Bezel Locking Screw
Advertising