Sun Microsystems Sun Fire X4100 - Manual (Page 166)

4-36 Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
FIGURE 4-32 Unfastening the Front I/O Board Screw From the Chassis
Note – The white plastic sheath that is attached to the front I/O board is an
insulator, which protects the board components. Do not remove this insulator sheath
from the front I/O board.
12. Gently push the front I/O board toward the rear of the chassis approximately 0.25
inch (6 mm), freeing the board from the two locating tabs at its bottom-left and
bottom-right corners. See
FIGURE 4-33 .
FIGURE 4-33 Releasing the Front I/O Board From the Chassis Locating Tabs