Sun Microsystems Sun Fire X4100 - Manual (Page 267)

Appendix E Serial Attached SCSI BIOS Configuration Utility E-19
E.3.7 Device Verify Screen
To access the Device Verify screen, press Enter on the appropriate field on the Device
Properties screen. This screen includes an Elapsed Time and status bar, which begins
incrementing when the operation is started and which shows the current progress of
the operation.
When the Device Verify screen appears (see FIGURE E-10 ), press Enter to begin the
verify process. You may press Esc at any time to cancel the verify process. TABLE E-7
describes the fields of the screen.
********************************************************************************
* Device Verify -- SAS1064 *
* *
* Device Identifier SEAGATE ST936701LSUN36G 0456 *
* SAS Address 5000C500:001047C9 *
* Serial Number 39000SZC 3LC *
* *
* All sectors on the device will be verified. *
* Press Enter to continue or any other key to cancel. *
* *
* *
* *
* *
* Elapsed Time: 00:00:00 *
* *
* Percent *
* Complete 0% 100% *
* ************************************************** *
* * * *
* ************************************************** *
* *
* Esc=Exit F1=Help Alt+M=More Keys *
********************************************************************************
FIGURE E-10 Device Verify Screen
TABLE E-7 Device Verify Screen Field Descriptions
Field Description
Device Identifier The ASCII device identifier string extracted from the device’s
inquiry data.
SAS Address The SAS address of this device.