Sun Microsystems Sun Fire X4100 - Manual (Page 159)

Chapter 4 Maintaining the Sun Fire X4200 Server 4-29
FIGURE 4-23 Unfastening the Fan Connector Board Securing Screw
6. Slide the fan connector board toward the center of the chassis to disconnect it
from the front I/O board and to release it from the two locating tabs on the
chassis. See
FIGURE 4-24 .
7. Lift the board straight up to remove it from the system.
FIGURE 4-24 Releasing the Fan Connector Board
Installation is the reverse of this procedure.