Step 7 – Sun Microsystems Sun Fire X4100 User Manual
Page 194
Advertising
4-64
Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
7. Install a PCI card:
a. Working from the rear of the chassis, pivot the PCI card latch for the slot open
to receive the new PCI card. See
b. Insert the PCI card into the PCI card slot. Ensure that the PCI card's rear
connector panel engages the tab in the chassis rear panel. See
FIGURE 4-60
Installing a PCI Card
c. Pivot the PCI card latch closed over the rear connector panel of the PCI card
until it locks. See
.
Advertising