Sun Microsystems Sun Fire X4100 - Manual (Page 88)

3-28 Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
FIGURE 3-23 Unfastening the Fan Connector Board Securing Screw
6. Slide the fan connector board toward the center of the chassis to disconnect it
from the front I/O board and to release it from the two locating tabs on the
chassis. See
FIGURE 3-24 .
7. Lift the board straight up to remove it from the system.
FIGURE 3-24 Releasing the Fan Connector Board
Installation is the reverse of this procedure.