Sun Microsystems Sun Fire X4100 - Manual (Page 269)

Appendix E Serial Attached SCSI BIOS Configuration Utility E-21
E.3.8 Advanced Adapter Properties Screen
The Advanced Adapter Properties screen (see FIGURE E-11 ) allows you to view and
modify infrequently accessed adapter settings. TABLE E-8 describes the fields of the
screen.
The Advanced Adapter Properties screen provides access to advanced Device
Properties and PHY Properties. To modify the Link Error Settings Threshold Count
and Threshold Time, press Enter while the cursor is on the desired field and type the
new value.
********************************************************************************
* LSI Logic MPT Setup Utility v6.02.00.00 (2005.07.08) *
* Advanced Adapter Properties -- SAS1064 *
* *
* IRQ 0B *
* NVM Yes *
* IO Port Address A800 *
* Chip Revision ID 02 *
* *
* Spinup Delay (Secs) [ 2] *
* CHS Mapping [SCSI Plug and Play Mapping] *
* *
* Link Error Threshold Threshold *
* Settings Count Time(Secs) *
* Invalid DWORDs 0 0 *
* Loss of DWORD Sync 0 0 *
* Running Disparity Errors 0 0 *
* PHY Reset Errors 0 0 *
* *
* Advanced Device Properties *
* PHY Properties *
* Restore Defaults *
* Esc = Exit Menu F1/Shift+1 = Help *
* Enter = Select Item -/+ = Change Item *
*******************************************************************************
FIGURE E-11 Advanced Adapter Properties Screen