Sun Microsystems Sun Fire X4100 - Manual (Page 288)

E-40 Sun Fire X4100 and Sun Fire X4200 Servers Service Manual • June 2006
E.3.11.5 Exit Screen
It is important to exit the SAS BIOS Configuration Utility correctly, because some
changes take effect only when you exit.
From the Adapter List, press the Esc key to exit.
In addition, a similar Exit screen appears when you exit most other screens, and it
can be used to save settings.
FIGURE E-18 shows the Exit screen. Some options on the
Exit screen might be grayed out, indicating that they are not available at this time.
********************************************************************************
* LSI Logic MPT Setup Utility v6.02.00.00 (2005.07.08) *
* *
* *
* *
* *
* *
* *
* *
* *
* Adapter and/or device property changes have been made. *
* Cancel Exit *
* Save changes then exit this menu *
* Discard changes then exit this menu *
* Exit the Configuration Utility and Reboot *
* *
* *
* *
* *
* *
* *
* *
* Esc = Exit Menu F1/Shift+1 = Help *
* *
*******************************************************************************
FIGURE E-18 Exit Screen