Sun Microsystems Sun Fire X4100 User Manual
Page 185
Advertising
Chapter 4
Maintaining the Sun Fire X4200 Server
4-55
FIGURE 4-47
Removing a DIMM
9. Remove all CPUs from the motherboard:
a. Hold down on the top of the heatsink to prevent it from tipping unevenly
while you alternately loosen the two spring-loaded mounting screws that
secure the heatsink to the motherboard. Turn the screws 180-degrees at a time,
then remove the screws when they are detached. See
and
FIGURE 4-48
Location of the Heatsink Screws
The four screws
are circled in red.
Advertising